Dynojet Flow Meter Uživatelský manuál stáhnout pdf (Strana 17)

USER GUIDE

Flow Meter Testing

Version 1 Flow Meter User Guide

CHECKING TEST POINT FIVE—RIGHT OUTFLOW

Testing the outflow allows you to determine the efficiency of the right pump head.

1 Remove the right outflow hose from the right outflow catch bottle.

2 Attach the right outflow hose to the bottom port of the flow meter.

3Turn the air pump on.

4 Record the flow meter reading in a data table on page 16.

If the flow meter reading is below the testing range, rebuild the pump head.

Pump head rebuild kits (P/N 79190003) are available from Dynojet.

Note: Dynojet recommends rebuilding both pump heads at the same time.

5Turn the air pump off.

6 Replace the right outflow hose into the right outflow catch bottle.

Figure 10: Test Point Five—Right Outflow

bottom port

outflow hose

left side of air pump

looking from the

bottle side

right side of air pump

looking from the

bottle side

catch bottle

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Žádné komentáře

Dynojet Flow Meter Uživatelský manuál Strana 17